Bollard installation and repair in Duncanville, TX protects your commercial property from vehicle damage while directing traffic flow in an established southern Dallas County community known as the City of Champions. C & D Commercial Services has been installing and repairing bollards across Dallas County and DFW for over 40 years. Duncanville sits in southern Dallas County along IH-20. The city is known as the City of Champions due to its successful sports programs. The commercial development is concentrated along the IH-20 corridor, Cedar Valley, and Main Street. IH-20 is the primary highway corridor, with commercial development along the frontage road. Main Street has established commercial properties that serve the local community. The Cedar Valley area has a mix of retail and service properties. The city has established properties from the 1970s through 1990s. The clay soil in southern Dallas County is active, though the Duncanville location is slightly less affected than areas further south. The expansive clay can heave bollard footings over time, and we design the installation to withstand the clay movement. The established properties have settled over the decades, creating low spots and uneven pavement.
We work with property managers, business owners, and facility directors in Duncanville who need bollard installation, bollard repair, and bollard replacement. Our crews handle the established corridor conditions and the southern Dallas County clay.
Our approach starts with a site assessment. We walk the property and identify the areas that need bollard protection. For Duncanville IH-20 corridor properties, the focus is on protecting building corners, storefronts, utility equipment, and pedestrian walkways from the highway traffic. The frontage road properties see steady traffic from commuters and travelers, and the parking lots need bollards to prevent vehicles from crossing into pedestrian areas. The security bollards need to be visible with reflective markings for the IH-20 traffic.
For Main Street properties, the established commercial corridor has storefronts that need both vehicle protection and a clean appearance. The mature trees along Main Street create shaded zones, and the parking lots may have settled over the decades. The bollard installation needs to account for the settled pavement conditions. We install decorative bollards that complement the established character while providing vehicle protection.
For Cedar Valley area properties, the mix of retail and service properties needs bollards to protect the storefronts and pedestrian zones. The established character of the area means the decorative bollards need to complement the existing aesthetic. The bollards need to be both functional and aesthetically appropriate.
The clay soil in southern Dallas County is the key consideration for every bollard installation in Duncanville. We assess the soil conditions at each installation location and determine the appropriate footing depth. The standard 18-inch embedding may be sufficient for some locations, but we typically go 18 to 24 inches deep for standard installations and 24 to 30 inches for security-rated bollards.
For properties that already have bollards, we assess the condition. The clay movement can heave footings over time, causing the bollard to lean or become loose. We can repair heaved footings by excavating around the footing, resetting the bollard, and pouring additional concrete. If the bollard has rusted at the base, we can cut out the rusted section and weld in new steel.
We install four main types of bollards for Duncanville commercial properties. Security bollards are steel pipe bollards, typically 6 inches in diameter, embedded in concrete and filled with concrete. For the IH-20 corridor properties, the security bollards are essential for protecting building corners and utility equipment from the highway traffic. The bollards are designed to stop vehicles and prevent damage to buildings and equipment.
Decorative bollards are used for the Main Street and Cedar Valley storefronts and pedestrian areas. We install cast iron and steel decorative bollards in finishes that complement the established character. The retail corridors have a specific aesthetic from the 1970s through 1990s development, and we select bollard designs and finishes that match. The decorative bollards can be powder-coated in various colors to match the storefront facade.
Lighted bollards combine protection with illumination. These are used for pedestrian walkways and entrance areas that need lighting at night. The LED lighting is integrated into the bollard and provides a low-level light that improves safety without creating glare. For Duncanville properties with evening operations, the lighted bollards improve both safety and security. The Main Street corridor benefits from the lighted bollards for the evening pedestrian traffic.
Removable bollards are used in areas that need temporary vehicle control. These bollards sit in a ground sleeve that is embedded in the pavement, and the bollard can be removed when vehicle access is needed. For loading areas that need to be accessible to delivery trucks during certain hours but protected from vehicle traffic during other hours, removable bollards provide the flexibility. The ground sleeve is embedded deep enough to withstand the clay movement.
We also install reflective markings on all security bollards. The reflective tape or paint improves visibility at night and in poor weather conditions. For bollards near the IH-20 traffic, the reflective markings are essential for preventing vehicle collisions with the bollards themselves.
Our bollard installation process is designed for the established corridors and the southern Dallas County clay conditions in Duncanville. The process starts with the site assessment. We identify the locations that need bollards, the type of bollard appropriate for each location, and the spacing between bollards. For the IH-20 corridor, we space bollards 4 to 6 feet apart. For the Main Street storefronts, we space bollards 4 to 5 feet apart.
For installation in existing concrete, we core drill a hole at each bollard location. The core drill creates a clean hole through the concrete without damaging the surrounding pavement. The hole is typically 8 to 10 inches in diameter for a 6-inch bollard. We embed the steel pipe at least 18 inches into the core-drilled hole for standard installations, and 24 inches for security-rated bollards. The concrete fill anchors the bollard and provides the impact resistance.
For installation in areas without existing concrete, we dig a footing and pour concrete. The footing is typically 24 inches deep, depending on the soil conditions. The clay soil in southern Dallas County is active, and we may go deeper for security-rated bollards. The footing is typically 12 to 18 inches in diameter.
After the bollard is installed, we apply reflective markings on security bollards. The reflective tape or paint is applied in a high-visibility pattern, typically alternating bands of white and orange or white and yellow. For the decorative bollards in the Main Street and Cedar Valley corridors, we apply custom finishes that complement the established character.
For the established properties with settled pavement, the installation may need to include pavement repair. If the pavement has cracked or settled near the bollard location, we can patch the pavement or pour a new concrete pad around the bollard. This ensures the bollard installation is solid and the surrounding pavement is safe. The entire process typically takes one day for a standard installation of 5 to 10 bollards. We work with the property manager to schedule the installation at a time that minimizes disruption to the business operations.
We do not list prices on a website because every bollard project is different. The number of bollards, the type, whether they are decorative or security-rated, whether we need to core drill into existing concrete or pour new footings, the spacing and layout. What we can tell you is that we have been installing bollards in DFW for over 40 years, and we have the equipment and crews to handle any project. Property managers who compare our quotes typically find we come in lower because we already have the concrete and paving crews on site for other work.
Call us for a free estimate. We will walk your property, assess your needs, and give you a number that is honest and straightforward.
What areas of Duncanville do you serve?
We serve all commercial properties in Duncanville, including the IH-20 corridor, Cedar Valley, Main Street, and the established commercial corridors. We cover the entire city.
Can you install bollards for the Cedar Valley area?
Yes. The Cedar Valley area in Duncanville has commercial properties that serve the local community. The area has a mix of retail and service properties. We install both security and decorative bollards, depending on the property type. The established character of the area means the decorative bollards need to complement the existing aesthetic.
Do you install bollards for Main Street corridor properties?
Yes. Main Street in Duncanville has established commercial properties that need both vehicle protection and a clean appearance. We install decorative bollards that complement the established character while providing vehicle protection. The storefronts along Main Street need bollards to protect the pedestrian zones from vehicle traffic.
How deep do you install bollards in Duncanville's clay soil?
The clay soil in southern Dallas County is aggressive, though the Duncanville location is slightly less affected than DeSoto. We typically embed bollards 18 to 24 inches deep for standard installations, and 24 to 30 inches for security-rated bollards. We assess the soil conditions at each location and adjust the depth as needed.
Do you install bollards for IH-20 frontage road properties?
Yes. The IH-20 corridor in Duncanville has commercial development along the frontage road. The properties see steady traffic from commuters and travelers, and the bollards need to protect building corners and pedestrian walkways from the highway traffic. We install security bollards with reflective markings for the IH-20 traffic visibility.
Need this service for your commercial property in DFW? C & D Commercial Services offers fast, free quotes with responses within 1 business day. Call us at 972.475.2271.
