Construction and renovation projects leave behind a significant amount of debris on window and glass surfaces. Drywall dust settles on every horizontal surface, paint overspray adheres to adjacent glass, adhesive residue from protective film and stickers bonds to the surface, and mortar or concrete splatter from masonry work can permanently etch glass if not removed promptly and correctly. Cleaning post-construction windows requires specialized techniques, equipment, and cleaning solutions that differ significantly from routine window washing.
C & D Commercial Services provides professional post-construction window cleaning for commercial properties throughout the Dallas-Fort Worth area. Our post-construction glass cleaning process is designed to remove all construction residue without scratching, etching, or damaging the glass surface. We begin by removing all construction stickers, protective film, and tape residue using commercial-grade adhesive removers that dissolve the bond without harming the glass or any applied coatings.
Next, our technicians carefully scrape paint splatter, adhesive spots, and mortar residue using specialized razor blades held at the correct angle to remove deposits without scratching the glass. Different blade types and angles are used for different types of residue — flexible blades for general paint removal, stiff blades for cured adhesive, and plastic scrapers for delicate or coated glass surfaces. Every scraping pass is followed by a wipe-down to inspect for remaining residue.
Once all visible construction debris has been removed, the glass receives a deep cleaning using professional-grade cleaning solutions formulated to cut through construction dust and grime. Unlike standard window cleaning solutions, post-construction cleaning solutions contain higher concentrations of cleaning agents and may include mild abrasives suspended in liquid to remove embedded residue without scratching. The glass is then detailed using a squeegee technique that leaves the surface streak-free and ready for inspection.
Post-construction window cleaning is typically the final step before building turnover and should be scheduled immediately after construction completion but before tenant move-in. Cleaning windows after tenants have moved in is significantly more difficult due to furniture, window treatments, and belongings that block access to interior glass. C & D coordinates with general contractors and property managers to schedule post-construction cleaning at the optimal point in the project timeline.
Related services: Storefront Window Cleaning for Retail & Restaurants, High-Rise Office Window Washing, Specialty Glass Cleaning.
In addition to windows, C & D’s post-construction cleaning services can include cleaning of glass storefronts, atrium glazing, interior glass partitions, glass handrails and balustrades, and mirrored surfaces throughout the property. All glass surfaces are cleaned to a standard that meets the expectations of new tenants and building inspectors. For LEED-certified or green building projects, we use environmentally preferable cleaning products that meet the project’s sustainability requirements.
Our post-construction crews are trained in construction site safety protocols, including proper use of personal protective equipment and awareness of active construction hazards. We carry the insurance coverage required by general contractors for work on active construction sites, and we coordinate our schedule with other trades to avoid conflicts and ensure our work is the final step before building occupancy.
Different types of construction debris require different removal techniques. Drywall dust is removed using HEPA-filtered vacuums and microfiber cloths that capture fine particles without spreading them across the glass surface. Paint overspray may be removed using specialized solvents that soften the paint without damaging the glass, followed by careful scraping. Adhesive residue from protective film and construction tape is dissolved using citrus-based or petroleum-based adhesive removers that break the bond without scratching the glass. Silicone and caulk residue requires specialized removal techniques using silicone-specific solvents and non-marring scrapers.
For large commercial projects such as office towers, retail centers, and mixed-use developments, the volume of post-construction glass cleaning can be substantial — often encompassing hundreds or thousands of windows plus extensive atrium glazing, curtain wall systems, and interior glass partitions. C & D phases these large projects to coordinate with the construction schedule and building turnover timeline, cleaning completed sections as they become available while maintaining access for other finishing trades.
Post-construction window cleaning is included in many general contractors’ punch list requirements and must be completed to a standard that satisfies both the contractor’s quality requirements and the building owner’s expectations. C & D works with general contractors to establish clear quality standards before work begins and provides photographic documentation of completed work for inclusion in project closeout documentation.
Need post-construction window cleaning services dfw for your commercial property in the Dallas-Fort Worth area? C & D Commercial Services offers fast, free quotes with responses within 1 business day. Fill out the form below and our team will get back to you promptly.
